Technical Parameters:
No. | Items | Parameters |
1 | Max. Size of Die | Φ450mm |
2 | Max. Weight of Die | 130kg |
3 | Max. Die Closing Stroke | ≤250mm |
4 | Hydraulic Pressure | 4-6MPa |
5 | Inclination for Side Pouring | 0-90˚ |
6 | Inclination for Frontal Pouring | 0-110˚ |
7 | Hydraulic Oil Volume | 163L |
8 | (Optional)Top Core Stroke | 20mm |
9 | Machine Power | 5.5kw |
10 | Net Weight | 1750kg |
11 | External Dimensions (L*W*H) | 2250*2160*1560mm |
Process composition:
Raise to a predetermined angle and place the sand core, step on the foot switch once (clamping) → casting → step on the foot switch once → timing after the clamping mechanism descends and returns to the original position → when the time is up, the mold is automatically opened → take out the product → switch Step on once → flip the mold clamping frame → mold rotation → mold lowering, rotating and cooling → mold rising → mold rotation return → mold clamping frame flipping back to position → worktable rising
Material selection:
1. The whole frame is made of QT450 castings, which is not easy to deform and has good toughness;
2. The lubricating part should be injected with general-purpose lithium-based grease with a dropping point of 193°C and a working penetration of 240. 3# general-purpose lithium-based grease lubricating oil is more resistant to high temperature than 2# and is used for heavy loads or vertical motor bearings. lubrication. The anti-wear hydraulic oil is 68#, and the new machine is replaced every three months, and then every eight months;
3. The coolant in the cooling pool is composed of graphite powder and water (about 850L);
4. High frequency quenching and chrome plating are used for mold clamping to improve surface hardness and durability;
5. The hydraulic system adopts Jiejia oil circuit, adopts Mitsubishi PLC and Schneider electric components, high-end configuration of first-line brands, quick response, and prolongs equipment life;
6. Equipped with Omron sensor to control mold clamping accuracy and low failure rate.
Our Service:
We have strict management system,complete quality guarantee system and fine pre-sale and after-sale service system.
1.Pre-sale Service System
Please do not hesitate to contact with us If you are interested in machine. We can design the machine you requirements.
2.After-sale Service System
24/7 on line,including mobile/wechat/whatsapp etc. Our technician is available to visit and go to your place,and they will help your side for installation,maintenance,and training.
3.Payment
30% Deposit by TT,and The rest 70% by photos or you can check the quality on our factory before they shipment.